GoodWe BatteryInverter
Der GoodWe BatteryInverter ist ein hybrider PV- und Batteriespeicher-Wechselrichter für Wohn- und kleingewerbliche Energiesysteme. Diese Modbus-TCP-Vorlage umfasst den vollständigen Satz an Netzschutz- und Netzcode-Registern: mehrstufige Spannungs- und Frequenzauslöseschwellen mit Auslösezeiten, LVRT- und HVRT-Durchfahrkurven mit Blindstrominjektionssteigungen, Frequenz-Durchfahrkurven (FRT), Q(U)-, Q(P)-, cos-phi(P)- und P(U)-Blindleistungskennlinien, Lade- und Entladefrequenzregelung des Batteriespeichers sowie Leistungsgradientbegrenzungen. Jedes Register ist als lesbares (_a) und schreibbares (_b) Paar gespiegelt, sodass Ihr ModbusCloud-Gateway Einstellungen prüfen und neue Werte schreiben kann. Ein einmaliger Template-Import genügt.
- Protokoll
- Modbus TCP
- Anschluss
- Ethernet, Modbus TCP
- Register
- 539, lesen und schreiben
- Marke
- GoodWe
- Zuletzt aktualisiert
Register (539)
271 lesen, 268 schreiben
| Name | Einheit | Zugriff | Adresse (Verborgen bis zur Eingabe Ihrer E-Mail-Adresse) | Funktion (verborgen) | Typ (verborgen) |
|---|---|---|---|---|---|
| grid_volt_high_s1_a | V | Lesen | |||
| grid_volt_high_s1_time_a | s | Lesen | |||
| grid_volt_low_s1_a | V | Lesen | |||
| grid_volt_low_s1_time_a | s | Lesen | |||
| grid_volt_high_s2_a | V | Lesen | |||
| grid_volt_high_s2_time_a | s | Lesen | |||
| grid_volt_low_s2_a | V | Lesen | |||
| grid_volt_low_s2_time_a | s | Lesen | |||
| grid_volt_quality_a | Lesen | ||||
| grid_freq_high_s1_a | Hz | Lesen | |||
| grid_freq_high_s1_time_a | s | Lesen | |||
| grid_freq_low_s1_a | Hz | Lesen | |||
| grid_freq_low_s1_time_a | s | Lesen | |||
| grid_freq_high_s2_a | Hz | Lesen | |||
| grid_freq_high_s2_time_a | s | Lesen | |||
| grid_freq_low_s2_a | Hz | Lesen | |||
| grid_freq_low_s2_time_a | s | Lesen | |||
| grid_volt_high_a | V | Lesen | |||
| grid_volt_low_a | V | Lesen | |||
| grid_freq_high_a | Hz | Lesen | |||
| grid_freq_low_a | Hz | Lesen | |||
| grid_recover_time_a | s | Lesen | |||
| grid_volt_recover_high_a | V | Lesen | |||
| grid_volt_recover_low_a | V | Lesen | |||
| grid_freq_recover_high_a | Hz | Lesen | |||
| grid_freq_recover_low_a | Hz | Lesen | |||
| grid_volt_recover_time_a | s | Lesen | |||
| grid_freq_recover_time_a | s | Lesen | |||
| power_rate_limit_generate_a | Lesen | ||||
| power_rate_limit_reconnect_a | Lesen | ||||
| power_rate_limit_reduction_a | Lesen | ||||
| grid_protect_a | Lesen | ||||
| enable_power_slope_cos_phi_p_a | Lesen | ||||
| enable_curve_cos_phi_p_a | Lesen | ||||
| a_point_power_a | W | Lesen | |||
| a_point_cos_phi_a | Lesen | ||||
| b_point_power_a | W | Lesen | |||
| b_point_cos_phi_a | Lesen | ||||
| c_point_power_a | W | Lesen | |||
| c_point_cos_phi_a | Lesen | ||||
| lock_in_voltage_a | V | Lesen | |||
| lock_out_voltage_a | V | Lesen | |||
| lock_out_power_a | W | Lesen | |||
| enable_pf_curve_a | Lesen | ||||
| ffrozen_dch_a | Hz | Lesen | |||
| ffrozen_ch_a | Hz | Lesen | |||
| fstop_dch_a | Hz | Lesen | |||
| fstop_ch_a | Hz | Lesen | |||
| of_recovery_waiting_time | s | Lesen | |||
| recovery_frequrncy1_a | Hz | Lesen | |||
| recovery_frequency2_a | Hz | Lesen | |||
| of_recovery_slope_a | Lesen | ||||
| cfp_settings_a | Lesen | ||||
| cfp_of_slope_percent_a | % | Lesen | |||
| cfp_uf_slope_percent_a | % | Lesen | |||
| cfp_of_recover_power_percent_a | % | Lesen | |||
| enable_qu_curve_a | Lesen | ||||
| lock_in_power_qu_a | W | Lesen | |||
| lock_out_power_qu_a | W | Lesen | |||
| v1_voltage_a | V | Lesen | |||
| v1_value_a | var | Lesen | |||
| v2_voltage_a | V | Lesen | |||
| v2_value_a | var | Lesen | |||
| v3_voltage_a | V | Lesen | |||
| v3_value_a | var | Lesen | |||
| v4_voltage_a | V | Lesen | |||
| v4_value_a | var | Lesen | |||
| k_value_a | Lesen | ||||
| time_constant_a | s | Lesen | |||
| miscellanea_a | Lesen | ||||
| enable_pu_curve_a | Lesen | ||||
| power_change_rate_a | Lesen | ||||
| v1_voltage_pu_a | V | Lesen | |||
| v1_value_pu_a | W | Lesen | |||
| v2_voltage_pu_a | V | Lesen | |||
| v2_value_pu_a | W | Lesen | |||
| v3_voltage_pu_a | V | Lesen | |||
| v3_value_pu_a | W | Lesen | |||
| v4_voltage_pu_a | V | Lesen | |||
| v4_value_pu_a | W | Lesen | |||
| fixed_power_factor_a | Lesen | ||||
| fixed_reactive_power_a | W | Lesen | |||
| fixed_active_power_a | W | Lesen | |||
| auto_test_enable | Lesen | ||||
| auto_test_step | Lesen | ||||
| uw_italy_freq_mode | Lesen | ||||
| all_power_curve_disable_a | Lesen | ||||
| r_phase_fixed_active_power_a | W | Lesen | |||
| s_phase_fixed_active_power_a | W | Lesen | |||
| t_phase_fixed_active_power_a | W | Lesen | |||
| grid_volt_high_s3_a | V | Lesen | |||
| grid_volt_high_s3_time_a | s | Lesen | |||
| grid_volt_low_s3_a | V | Lesen | |||
| grid_volt_low_s3_time_a | s | Lesen | |||
| zvrt_config_a | Lesen | ||||
| lvrt_start_volt_a | V | Lesen | |||
| lvrt_end_volt_a | V | Lesen | |||
| lvrt_start_trip_time_a | s | Lesen | |||
| lvrt_end_trip_time_a | s | Lesen | |||
| lvrt_trip_limit_volt_a | V | Lesen | |||
| hvrt_start_volt_a | V | Lesen | |||
| hvrt_end_volt_a | V | Lesen | |||
| hvrt_start_trip_time_a | s | Lesen | |||
| hvrt_end_trip_time_a | s | Lesen | |||
| hvrt_trip_limit_volt_a | V | Lesen | |||
| pf_time_constant_a | s | Lesen | |||
| power_freq_time_constant_a | s | Lesen | |||
| pu_time_constant_a | s | Lesen | |||
| d_point_power_a | W | Lesen | |||
| d_point_cos_phi_a | Lesen | ||||
| uf_recovery_waiting_time_a | s | Lesen | |||
| uf_recover_slope_a | Lesen | ||||
| cfp_uf_recover_power_percent_a | % | Lesen | |||
| power_charge_limit_a | W | Lesen | |||
| power_charge_limit_reconnect_a | W | Lesen | |||
| c_ext_uf_charge_stop_a | Lesen | ||||
| c_ext_of_discharge_stop_a | Lesen | ||||
| c_ext_twosstepf_flg_a | Lesen | ||||
| grid_volt_high_s1_b | V | Schreiben | |||
| grid_volt_high_s1_time_b | s | Schreiben | |||
| grid_volt_low_s1_b | V | Schreiben | |||
| grid_volt_low_s1_time_b | s | Schreiben | |||
| grid_volt_high_s2_b | V | Schreiben | |||
| grid_volt_high_s2_time_b | s | Schreiben | |||
| grid_volt_low_s2_b | V | Schreiben | |||
| grid_volt_low_s2_time_b | s | Schreiben | |||
| grid_volt_quality_b | Schreiben | ||||
| grid_freq_high_s1_b | Hz | Schreiben | |||
| grid_freq_high_s1_time_b | s | Schreiben | |||
| grid_freq_low_s1_b | Hz | Schreiben | |||
| grid_freq_low_s1_time_b | s | Schreiben | |||
| grid_freq_high_s2_b | Hz | Schreiben | |||
| grid_freq_high_s2_time_b | s | Schreiben | |||
| grid_freq_low_s2_b | Hz | Schreiben | |||
| grid_freq_low_s2_time_b | s | Schreiben | |||
| grid_volt_high_b | V | Schreiben | |||
| grid_volt_low_b | V | Schreiben | |||
| grid_freq_high_b | Hz | Schreiben | |||
| grid_freq_low_b | Hz | Schreiben | |||
| grid_recover_time_b | s | Schreiben | |||
| grid_volt_recover_high_b | V | Schreiben | |||
| grid_volt_recover_low_b | V | Schreiben | |||
| grid_freq_recover_high_b | Hz | Schreiben | |||
| grid_freq_recover_low_b | Hz | Schreiben | |||
| grid_volt_recover_time_b | s | Schreiben | |||
| grid_freq_recover_time_b | s | Schreiben | |||
| power_rate_limit_generate_b | Schreiben | ||||
| power_rate_limit_reconnect_b | Schreiben | ||||
| power_rate_limit_reduction_b | Schreiben | ||||
| grid_protect_b | Schreiben | ||||
| enable_power_slope_cos_phi_p_b | Schreiben | ||||
| enable_curve_cos_phi_p_b | Schreiben | ||||
| a_point_power_b | W | Schreiben | |||
| a_point_cos_phi_b | Schreiben | ||||
| b_point_power_b | W | Schreiben | |||
| b_point_cos_phi_b | Schreiben | ||||
| c_point_power_b | W | Schreiben | |||
| c_point_cos_phi_b | Schreiben | ||||
| lock_in_voltage_b | V | Schreiben | |||
| lock_out_voltage_b | V | Schreiben | |||
| lock_out_power_b | W | Schreiben | |||
| enable_pf_curve_b | Schreiben | ||||
| ffrozen_dch_b | Hz | Schreiben | |||
| ffrozen_ch_b | Hz | Schreiben | |||
| fstop_dch_b | Hz | Schreiben | |||
| fstop_ch_b | Hz | Schreiben | |||
| recovery_waiting_time | s | Schreiben | |||
| recovery_frequrncy1_b | Hz | Schreiben | |||
| recovery_frequency2_b | Hz | Schreiben | |||
| cfp_settings_b | Schreiben | ||||
| of_recovery_slope_b | Schreiben | ||||
| cfp_of_slope_percent_b | % | Schreiben | |||
| cfp_uf_slope_percent_b | % | Schreiben | |||
| cfp_of_recover_power_percent_b | % | Schreiben | |||
| enable_qu_curve_b | Schreiben | ||||
| lock_in_power_qu_b | W | Schreiben | |||
| lock_out_power_qu_b | W | Schreiben | |||
| v1_voltage_b | V | Schreiben | |||
| v1_value_b | var | Schreiben | |||
| v2_voltage_b | V | Schreiben | |||
| v2_value_b | var | Schreiben | |||
| v3_voltage_b | V | Schreiben | |||
| v3_value_b | var | Schreiben | |||
| v4_voltage_b | V | Schreiben | |||
| v4_value_b | var | Schreiben | |||
| k_value_b | Schreiben | ||||
| time_constant_b | s | Schreiben | |||
| miscellanea_b | Schreiben | ||||
| enable_pu_curve_b | Schreiben | ||||
| power_change_rate_b | Schreiben | ||||
| v1_voltage_pu_b | V | Schreiben | |||
| v1_value_pu_b | W | Schreiben | |||
| v2_voltage_pu_b | V | Schreiben | |||
| v2_value_pu_b | W | Schreiben | |||
| v3_voltage_pu_b | V | Schreiben | |||
| v3_value_pu_b | W | Schreiben | |||
| v4_voltage_pu_b | V | Schreiben | |||
| v4_value_pu_b | W | Schreiben | |||
| fixed_power_factor_b | Schreiben | ||||
| fixed_reactive_power_b | W | Schreiben | |||
| fixed_active_power_b | W | Schreiben | |||
| all_power_curve_disable_b | Schreiben | ||||
| r_phase_fixed_active_power_b | W | Schreiben | |||
| s_phase_fixed_active_power_b | W | Schreiben | |||
| t_phase_fixed_active_power_b | W | Schreiben | |||
| grid_volt_high_s3_b | V | Schreiben | |||
| grid_volt_high_s3_time_b | s | Schreiben | |||
| grid_volt_low_s3_b | V | Schreiben | |||
| grid_volt_low_s3_time_b | s | Schreiben | |||
| zvrt_config_b | Schreiben | ||||
| lvrt_start_volt_b | V | Schreiben | |||
| lvrt_end_volt_b | V | Schreiben | |||
| lvrt_start_trip_time_b | s | Schreiben | |||
| lvrt_end_trip_time_b | s | Schreiben | |||
| lvrt_trip_limit_volt_b | V | Schreiben | |||
| hvrt_start_volt_b | V | Schreiben | |||
| hvrt_end_volt_b | V | Schreiben | |||
| hvrt_start_trip_time_b | s | Schreiben | |||
| hvrt_end_trip_time_b | s | Schreiben | |||
| hvrt_trip_limit_volt_b | V | Schreiben | |||
| pf_time_constant_b | s | Schreiben | |||
| power_freq_time_constant_b | s | Schreiben | |||
| pu_time_constant_b | s | Schreiben | |||
| d_point_power_b | W | Schreiben | |||
| d_point_cos_phi_b | Schreiben | ||||
| uf_recovery_waiting_time_b | s | Schreiben | |||
| uf_recover_slope_b | Schreiben | ||||
| cfp_uf_recover_power_percent_b | % | Schreiben | |||
| power_charge_limit_b | W | Schreiben | |||
| power_charge_limit_reconnect_b | W | Schreiben | |||
| c_ext_uf_charge_stop_b | Schreiben | ||||
| c_ext_of_discharge_stop_b | Schreiben | ||||
| c_ext_twosstepf_flg_b | Schreiben | ||||
| v2_rpm_enable_qp_curve_a | Lesen | ||||
| v2_rpm_qp_p1_power_a | W | Lesen | |||
| v2_rpm_qp_p1_reactive_power_a | W | Lesen | |||
| v2_rpm_qp_p2_power_a | W | Lesen | |||
| v2_rpm_qp_p2_reactive_power_a | W | Lesen | |||
| v2_rpm_qp_p3_power_a | W | Lesen | |||
| v2_rpm_qp_p3_reactive_power_a | W | Lesen | |||
| v2_rpm_qp_p4_power_a | W | Lesen | |||
| v2_rpm_qp_p4_reactive_power_a | W | Lesen | |||
| v2_rpm_qp_p5_power_a | W | Lesen | |||
| v2_rpm_qp_p5_reactive_power_a | W | Lesen | |||
| v2_rpm_qp_p6_power_a | W | Lesen | |||
| v2_rpm_qp_p6_reactive_power_a | W | Lesen | |||
| v2_rpm_enable_fixed_q_a | Lesen | ||||
| v2_rpm_qu_curve_mode_a | Lesen | ||||
| v2_rpm_qu_overexcited_slope_a | Lesen | ||||
| v2_rpm_qu_underexcited_slope_a | Lesen | ||||
| v2_rpm_qu_voltage_dead_band_a | V | Lesen | |||
| v2_rpm_qp_curve_mode_a | Lesen | ||||
| v2_rpm_qp_overexcited_slope_a | Lesen | ||||
| v2_rpm_qp_underexcited_slope_a | Lesen | ||||
| v2_fpp_over_freq_stage_3_value_a | Hz | Lesen | |||
| v2_fpp_under_freq_stage_3_value_a | Hz | Lesen | |||
| v2_fpp_over_freq_stage_4_value_a | Hz | Lesen | |||
| v2_fpp_under_freq_stage_4_value_a | Hz | Lesen | |||
| v2_vpp_under_volt_stage_1_value_a | V | Lesen | |||
| v2_vpp_under_volt_stage_1_trip_time_a | ms | Lesen | |||
| v2_vpp_over_volt_stage_1_value_a | V | Lesen | |||
| v2_vpp_over_volt_stage_1_trip_time_a | ms | Lesen | |||
| v2_vpp_under_volt_stage_2_value_a | V | Lesen | |||
| v2_vpp_under_volt_stage_2_trip_time_a | ms | Lesen | |||
| v2_vpp_over_volt_stage_2_value_a | V | Lesen | |||
| v2_vpp_over_volt_stage_2_trip_time_a | ms | Lesen | |||
| v2_vpp_under_volt_stage_3_value_a | V | Lesen | |||
| v2_vpp_under_volt_stage_3_trip_time_a | ms | Lesen | |||
| v2_vpp_over_volt_stage_3_value_a | V | Lesen | |||
| v2_vpp_over_volt_stage_3_trip_time_a | ms | Lesen | |||
| v2_vpp_under_volt_stage_4_value_a | V | Lesen | |||
| v2_vpp_under_volt_stage_4_trip_time_a | ms | Lesen | |||
| v2_vpp_over_volt_stage_4_value_a | V | Lesen | |||
| v2_vpp_over_volt_stage_4_trip_time_a | ms | Lesen | |||
| v2_fpp_under_freq_stage_1_trip_time_a | ms | Lesen | |||
| v2_fpp_over_freq_stage_1_trip_time_a | ms | Lesen | |||
| v2_fpp_under_freq_stage_2_trip_time_a | ms | Lesen | |||
| v2_fpp_over_freq_stage_2_trip_time_a | ms | Lesen | |||
| v2_fpp_under_freq_stage_3_trip_time_a | ms | Lesen | |||
| v2_fpp_over_freq_stage_3_trip_time_a | ms | Lesen | |||
| v2_fpp_under_freq_stage_4_trip_time_a | ms | Lesen | |||
| v2_fpp_over_freq_stage_4_trip_time_a | ms | Lesen | |||
| v2_vpp_ten_min_overvolt_stage_value_a | V | Lesen | |||
| v2_vpp_ten_min_stage_trip_time_a | ms | Lesen | |||
| v2_rpm_qu_time_constant_a | s | Lesen | |||
| v2_rpm_cosphip_time_constant_a | s | Lesen | |||
| v2_rpm_qp_time_constant_a | s | Lesen | |||
| v2_apm_pu_pt1_time_constant_pt1_mode_a | s | Lesen | |||
| v2_rpm_qu_v1_voltage_a | V | Lesen | |||
| v2_rpm_qu_v2_voltage_a | V | Lesen | |||
| v2_rpm_qu_v3_voltage_a | V | Lesen | |||
| v2_rpm_qu_v4_voltage_a | V | Lesen | |||
| v2_rpm_qu_extended_functions_a | Lesen | ||||
| v2_cp_ramp_up_lower_voltage_a | V | Lesen | |||
| v2_cp_ramp_up_upper_voltage_a | V | Lesen | |||
| v2_cp_reconnection_lower_voltage_a | V | Lesen | |||
| v2_cp_reconnection_upper_voltage_a | V | Lesen | |||
| v2_apm_pu_v1_voltage_a | V | Lesen | |||
| v2_apm_pu_v2_voltage_a | V | Lesen | |||
| v2_apm_pu_v3_voltage_a | V | Lesen | |||
| v2_apm_pu_v4_voltage_a | V | Lesen | |||
| v2_apm_pu_output_response_mode_a | Lesen | ||||
| v2_apm_pu_pt1_time_constant_gradient_mode_a | s | Lesen | |||
| v2_rpm_cosphip_lock_in_voltage_a | V | Lesen | |||
| v2_rpm_cosphip_lock_out_voltage_a | V | Lesen | |||
| v2_rpm_a_point_cos_phi_a | Lesen | ||||
| v2_rpm_b_point_cos_phi_a | Lesen | ||||
| v2_rpm_c_point_cos_phi_a | Lesen | ||||
| v2_rpm_d_point_cos_phi_a | Lesen | ||||
| v2_rpm_e_point_power_a | W | Lesen | |||
| v2_rpm_e_point_cos_phi_a | Lesen | ||||
| v2_rpm_cosphip_extended_functions_a | Lesen | ||||
| v2_apm_pf_overfrequency_delay_time_a | s | Lesen | |||
| v2_apm_pf_overfrequency_slope_a | Lesen | ||||
| v2_apm_pf_overfrequency_fstop_enable_a | Lesen | ||||
| v2_apm_pf_overfrequency_hysteresis_point_a | Hz | Lesen | |||
| v2_apm_pf_overfrequency_delay_waiting_time_a | s | Lesen | |||
| v2_apm_pf_overfrequency_hysteresis_slope_a | Lesen | ||||
| v2_apm_pf_underfrequency_delay_time_a | s | Lesen | |||
| v2_apm_pf_underfrequency_slope_a | Lesen | ||||
| v2_apm_pf_underfrequency_fstop_enable_a | Lesen | ||||
| v2_apm_pf_underfrequency_hysteresis_point_a | Hz | Lesen | |||
| v2_apm_pf_underfrequency_delay_waiting_time_a | s | Lesen | |||
| v2_apm_pf_underfrequency_hysteresis_slope_a | Lesen | ||||
| v2_cp_soft_ramp_up_gradient_enable_a | Lesen | ||||
| v2_cp_reconnection_gradient_enable_a | Lesen | ||||
| v2_vrt_current_distribution_mode_a | Lesen | ||||
| v2_vrt_active_power_recovery_mode_a | Lesen | ||||
| v2_vrt_active_power_recovery_speed_a | Lesen | ||||
| v2_vrt_reactive_power_recovery_mode_end_a | Lesen | ||||
| v2_vrt_reactive_power_recovery_speed_a | Lesen | ||||
| v2_vrt_active_power_recovery_slope_a | Lesen | ||||
| v2_vrt_reactive_power_recovery_slope_a | Lesen | ||||
| v2_lvrt_enable_a | Lesen | ||||
| v2_lvrt_enter_threshold_a | V | Lesen | |||
| v2_lvrt_exit_endpoint_a | V | Lesen | |||
| v2_lvrt_k1_slope_a | Lesen | ||||
| v2_lvrt_zero_current_mode_enable_a | Lesen | ||||
| v2_lvrt_zero_current_mode_entry_threshold_a | V | Lesen | |||
| v2_lvrt_uv1_voltage_a | V | Lesen | |||
| v2_lvrt_uv1_time_a | s | Lesen | |||
| v2_lvrt_uv2_voltage_a | V | Lesen | |||
| v2_lvrt_uv2_time_a | s | Lesen | |||
| v2_lvrt_uv3_voltage_a | V | Lesen | |||
| v2_lvrt_uv3_time_a | s | Lesen | |||
| v2_lvrt_uv4_voltage_a | V | Lesen | |||
| v2_lvrt_uv4_time_a | s | Lesen | |||
| v2_lvrt_uv5_voltage_a | V | Lesen | |||
| v2_lvrt_uv5_time_a | s | Lesen | |||
| v2_lvrt_uv6_voltage_a | V | Lesen | |||
| v2_lvrt_uv6_time_a | s | Lesen | |||
| v2_lvrt_uv7_voltage_a | V | Lesen | |||
| v2_lvrt_uv7_time_a | s | Lesen | |||
| v2_hvrt_enable_a | Lesen | ||||
| v2_hvrt_enter_high_crossing_a | V | Lesen | |||
| v2_hvrt_exit_high_crossing_a | V | Lesen | |||
| v2_hvrt_k2_slope_a | Lesen | ||||
| v2_hvrt_zero_current_mode_enable_a | Lesen | ||||
| v2_hvrt_zero_current_mode_entry_threshold_a | V | Lesen | |||
| v2_hvrt_ov1_voltage_a | V | Lesen | |||
| v2_hvrt_ov1_time_a | s | Lesen | |||
| v2_hvrt_ov2_voltage_a | V | Lesen | |||
| v2_hvrt_ov2_time_a | s | Lesen | |||
| v2_hvrt_ov3_voltage_a | V | Lesen | |||
| v2_hvrt_ov3_time_a | s | Lesen | |||
| v2_hvrt_ov4_voltage_a | V | Lesen | |||
| v2_hvrt_ov4_time_a | s | Lesen | |||
| v2_hvrt_ov5_voltage_a | V | Lesen | |||
| v2_hvrt_ov5_time_a | s | Lesen | |||
| v2_hvrt_ov6_voltage_a | V | Lesen | |||
| v2_hvrt_ov6_time_a | s | Lesen | |||
| v2_hvrt_ov7_voltage_a | V | Lesen | |||
| v2_hvrt_ov7_time_a | s | Lesen | |||
| v2_frt_enable_a | Lesen | ||||
| v2_frt_uf1_frequency_a | Hz | Lesen | |||
| v2_frt_uf1_time_a | s | Lesen | |||
| v2_frt_uf2_frequency_a | Hz | Lesen | |||
| v2_frt_uf2_time_a | s | Lesen | |||
| v2_frt_uf3_frequency_a | Hz | Lesen | |||
| v2_frt_uf3_time_a | s | Lesen | |||
| v2_frt_of1_frequency_a | Hz | Lesen | |||
| v2_frt_of1_time_a | s | Lesen | |||
| v2_frt_of2_frequency_a | Hz | Lesen | |||
| v2_frt_of2_time_a | s | Lesen | |||
| v2_frt_of3_frequency_a | Hz | Lesen | |||
| v2_frt_of3_time_a | s | Lesen | |||
| v2_rpm_enable_qp_curve_b | Schreiben | ||||
| v2_rpm_qp_p1_power_b | W | Schreiben | |||
| v2_rpm_qp_p1_reactive_power_b | W | Schreiben | |||
| v2_rpm_qp_p2_power_b | W | Schreiben | |||
| v2_rpm_qp_p2_reactive_power_b | W | Schreiben | |||
| v2_rpm_qp_p3_power_b | W | Schreiben | |||
| v2_rpm_qp_p3_reactive_power_b | W | Schreiben | |||
| v2_rpm_qp_p4_power_b | W | Schreiben | |||
| v2_rpm_qp_p4_reactive_power_b | W | Schreiben | |||
| v2_rpm_qp_p5_power_b | W | Schreiben | |||
| v2_rpm_qp_p5_reactive_power_b | W | Schreiben | |||
| v2_rpm_qp_p6_power_b | W | Schreiben | |||
| v2_rpm_qp_p6_reactive_power_b | W | Schreiben | |||
| v2_rpm_enable_fixed_q_b | Schreiben | ||||
| v2_rpm_qu_curve_mode_b | Schreiben | ||||
| v2_rpm_qu_overexcited_slope_b | Schreiben | ||||
| v2_rpm_qu_underexcited_slope_b | Schreiben | ||||
| v2_rpm_qu_voltage_dead_band_b | V | Schreiben | |||
| v2_rpm_qp_curve_mode_b | Schreiben | ||||
| v2_rpm_qp_overexcited_slope_b | Schreiben | ||||
| v2_rpm_qp_underexcited_slope_b | Schreiben | ||||
| v2_fpp_over_freq_stage_3_value_b | Hz | Schreiben | |||
| v2_fpp_under_freq_stage_3_value_b | Hz | Schreiben | |||
| v2_fpp_over_freq_stage_4_value_b | Hz | Schreiben | |||
| v2_fpp_under_freq_stage_4_value_b | Hz | Schreiben | |||
| v2_vpp_under_volt_stage_1_value_b | V | Schreiben | |||
| v2_vpp_under_volt_stage_1_trip_time_b | ms | Schreiben | |||
| v2_vpp_over_volt_stage_1_value_b | V | Schreiben | |||
| v2_vpp_over_volt_stage_1_trip_time_b | ms | Schreiben | |||
| v2_vpp_under_volt_stage_2_value_b | V | Schreiben | |||
| v2_vpp_under_volt_stage_2_trip_time_b | ms | Schreiben | |||
| v2_vpp_over_volt_stage_2_value_b | V | Schreiben | |||
| v2_vpp_over_volt_stage_2_trip_time_b | ms | Schreiben | |||
| v2_vpp_under_volt_stage_3_value_b | V | Schreiben | |||
| v2_vpp_under_volt_stage_3_trip_time_b | ms | Schreiben | |||
| v2_vpp_over_volt_stage_3_value_b | V | Schreiben | |||
| v2_vpp_over_volt_stage_3_trip_time_b | ms | Schreiben | |||
| v2_vpp_under_volt_stage_4_value_b | V | Schreiben | |||
| v2_vpp_under_volt_stage_4_trip_time_b | ms | Schreiben | |||
| v2_vpp_over_volt_stage_4_value_b | V | Schreiben | |||
| v2_vpp_over_volt_stage_4_trip_time_b | ms | Schreiben | |||
| v2_fpp_under_freq_stage_1_trip_time_b | ms | Schreiben | |||
| v2_fpp_over_freq_stage_1_trip_time_b | ms | Schreiben | |||
| v2_fpp_under_freq_stage_2_trip_time_b | ms | Schreiben | |||
| v2_fpp_over_freq_stage_2_trip_time_b | ms | Schreiben | |||
| v2_fpp_under_freq_stage_3_trip_time_b | ms | Schreiben | |||
| v2_fpp_over_freq_stage_3_trip_time_b | ms | Schreiben | |||
| v2_fpp_under_freq_stage_4_trip_time_b | ms | Schreiben | |||
| v2_fpp_over_freq_stage_4_trip_time_b | ms | Schreiben | |||
| v2_vpp_ten_min_overvolt_stage_value_b | V | Schreiben | |||
| v2_vpp_ten_min_stage_trip_time_b | ms | Schreiben | |||
| v2_rpm_qu_time_constant_b | s | Schreiben | |||
| v2_rpm_cosphip_time_constant_b | s | Schreiben | |||
| v2_rpm_qp_time_constant_b | s | Schreiben | |||
| v2_apm_pu_pt1_time_constant_pt1_mode_b | s | Schreiben | |||
| v2_rpm_qu_v1_voltage_b | V | Schreiben | |||
| v2_rpm_qu_v2_voltage_b | V | Schreiben | |||
| v2_rpm_qu_v3_voltage_b | V | Schreiben | |||
| v2_rpm_qu_v4_voltage_b | V | Schreiben | |||
| v2_rpm_qu_extended_functions_b | Schreiben | ||||
| v2_cp_ramp_up_lower_voltage_b | V | Schreiben | |||
| v2_cp_ramp_up_upper_voltage_b | V | Schreiben | |||
| v2_cp_reconnection_lower_voltage_b | V | Schreiben | |||
| v2_cp_reconnection_upper_voltage_b | V | Schreiben | |||
| v2_apm_pu_v1_voltage_b | V | Schreiben | |||
| v2_apm_pu_v2_voltage_b | V | Schreiben | |||
| v2_apm_pu_v3_voltage_b | V | Schreiben | |||
| v2_apm_pu_v4_voltage_b | V | Schreiben | |||
| v2_apm_pu_output_response_mode_b | Schreiben | ||||
| v2_apm_pu_pt1_time_constant_gradient_mode_b | s | Schreiben | |||
| v2_rpm_cosphip_lock_in_voltage_b | V | Schreiben | |||
| v2_rpm_cosphip_lock_out_voltage_b | V | Schreiben | |||
| v2_rpm_a_point_cos_phi_b | Schreiben | ||||
| v2_rpm_b_point_cos_phi_b | Schreiben | ||||
| v2_rpm_c_point_cos_phi_b | Schreiben | ||||
| v2_rpm_d_point_cos_phi_b | Schreiben | ||||
| v2_rpm_e_point_power_b | W | Schreiben | |||
| v2_rpm_e_point_cos_phi_b | Schreiben | ||||
| v2_rpm_cosphip_extended_functions_b | Schreiben | ||||
| v2_apm_pf_overfrequency_delay_time_b | s | Schreiben | |||
| v2_apm_pf_overfrequency_slope_b | Schreiben | ||||
| v2_apm_pf_overfrequency_fstop_enable_b | Schreiben | ||||
| v2_apm_pf_overfrequency_hysteresis_point_b | Hz | Schreiben | |||
| v2_apm_pf_overfrequency_delay_waiting_time_b | s | Schreiben | |||
| v2_apm_pf_overfrequency_hysteresis_slope_b | Schreiben | ||||
| v2_apm_pf_underfrequency_delay_time_b | s | Schreiben | |||
| v2_apm_pf_underfrequency_slope_b | Schreiben | ||||
| v2_apm_pf_underfrequency_fstop_enable_b | Schreiben | ||||
| v2_apm_pf_underfrequency_hysteresis_point_b | Hz | Schreiben | |||
| v2_apm_pf_underfrequency_delay_waiting_time_b | s | Schreiben | |||
| v2_apm_pf_underfrequency_hysteresis_slope_b | Schreiben | ||||
| v2_cp_soft_ramp_up_gradient_enable_b | Schreiben | ||||
| v2_cp_reconnection_gradient_enable_b | Schreiben | ||||
| v2_vrt_current_distribution_mode_b | Schreiben | ||||
| v2_vrt_active_power_recovery_mode_b | Schreiben | ||||
| v2_vrt_active_power_recovery_speed_b | Schreiben | ||||
| v2_vrt_reactive_power_recovery_mode_end_b | Schreiben | ||||
| v2_vrt_reactive_power_recovery_speed_b | Schreiben | ||||
| v2_vrt_active_power_recovery_slope_b | Schreiben | ||||
| v2_vrt_reactive_power_recovery_slope_b | Schreiben | ||||
| v2_lvrt_enable_b | Schreiben | ||||
| v2_lvrt_enter_threshold_b | V | Schreiben | |||
| v2_lvrt_exit_endpoint_b | V | Schreiben | |||
| v2_lvrt_k1_slope_b | Schreiben | ||||
| v2_lvrt_zero_current_mode_enable_b | Schreiben | ||||
| v2_lvrt_zero_current_mode_entry_threshold_b | V | Schreiben | |||
| v2_lvrt_uv1_voltage_b | V | Schreiben | |||
| v2_lvrt_uv1_time_b | s | Schreiben | |||
| v2_lvrt_uv2_voltage_b | V | Schreiben | |||
| v2_lvrt_uv2_time_b | s | Schreiben | |||
| v2_lvrt_uv3_voltage_b | V | Schreiben | |||
| v2_lvrt_uv3_time_b | s | Schreiben | |||
| v2_lvrt_uv4_voltage_b | V | Schreiben | |||
| v2_lvrt_uv4_time_b | s | Schreiben | |||
| v2_lvrt_uv5_voltage_b | V | Schreiben | |||
| v2_lvrt_uv5_time_b | s | Schreiben | |||
| v2_lvrt_uv6_voltage_b | V | Schreiben | |||
| v2_lvrt_uv6_time_b | s | Schreiben | |||
| v2_lvrt_uv7_voltage_b | V | Schreiben | |||
| v2_lvrt_uv7_time_b | s | Schreiben | |||
| v2_hvrt_enable_b | Schreiben | ||||
| v2_hvrt_enter_high_crossing_b | V | Schreiben | |||
| v2_hvrt_exit_high_crossing_b | V | Schreiben | |||
| v2_hvrt_k2_slope_b | Schreiben | ||||
| v2_hvrt_zero_current_mode_enable_b | Schreiben | ||||
| v2_hvrt_zero_current_mode_entry_threshold_b | V | Schreiben | |||
| v2_hvrt_ov1_voltage_b | V | Schreiben | |||
| v2_hvrt_ov1_time_b | s | Schreiben | |||
| v2_hvrt_ov2_voltage_b | V | Schreiben | |||
| v2_hvrt_ov2_time_b | s | Schreiben | |||
| v2_hvrt_ov3_voltage_b | V | Schreiben | |||
| v2_hvrt_ov3_time_b | s | Schreiben | |||
| v2_hvrt_ov4_voltage_b | V | Schreiben | |||
| v2_hvrt_ov4_time_b | s | Schreiben | |||
| v2_hvrt_ov5_voltage_b | V | Schreiben | |||
| v2_hvrt_ov5_time_b | s | Schreiben | |||
| v2_hvrt_ov6_voltage_b | V | Schreiben | |||
| v2_hvrt_ov6_time_b | s | Schreiben | |||
| v2_hvrt_ov7_voltage_b | V | Schreiben | |||
| v2_hvrt_ov7_time_b | s | Schreiben | |||
| v2_frt_enable_b | Schreiben | ||||
| v2_frt_uf1_frequency_b | Hz | Schreiben | |||
| v2_frt_uf1_time_b | s | Schreiben | |||
| v2_frt_uf2_frequency_b | Hz | Schreiben | |||
| v2_frt_uf2_time_b | s | Schreiben | |||
| v2_frt_uf3_frequency_b | Hz | Schreiben | |||
| v2_frt_uf3_time_b | s | Schreiben | |||
| v2_frt_of1_frequency_b | Hz | Schreiben | |||
| v2_frt_of1_time_b | s | Schreiben | |||
| v2_frt_of2_frequency_b | Hz | Schreiben | |||
| v2_frt_of2_time_b | s | Schreiben | |||
| v2_frt_of3_frequency_b | Hz | Schreiben | |||
| v2_frt_of3_time_b | s | Schreiben |
Register werden geladen…
Senden Sie Ihre Geräteliste
Steht ein Gerät noch nicht in der Bibliothek, erstellen wir die Vorlage kostenlos, sobald wir die Register haben.
Anwendungsfälle
- Überwachen Sie die mehrstufigen Netzspannungs- und Frequenzauslöseschwellen des GoodWe BatteryInverter, um die Einhaltung lokaler Netzcodes nach der Inbetriebnahme zu verifizieren.
- Verfolgen Sie LVRT- und HVRT-Durchfahrkurven sowie Blindstrominjektionssteigungen, um das korrekte Fehlerverhalten bei Netzstörungen zu bestätigen.
- Richten Sie einen Alert ein, wenn Q(U)- oder cos-phi(P)-Kurvenstützpunkte unerwartet geändert werden, was auf stille Firmware-Updates hinweisen kann.
- Prüfen Sie die Lade- und Entladefrequenzschwellen (ffrozen- und fstop-Register), damit der Batteriespeicher bei Netzfrequenz-Events nicht unnötig zykliert.
- Vergleichen Sie feste Wirkleistungs- und Blindleistungs-Sollwerte je Phase (R, S, T) standortübergreifend im Mehrstandort-Dashboard Ihres Portals.
Installation
Aktivieren Sie Modbus TCP am GoodWe BatteryInverter, indem Sie ein LAN- oder WiFi+LAN-Kommunikationsmodul installieren und Modbus TCP/IP in der SolarGo-App oder der Wechselrichter-Weboberfläche unter den Kommunikationseinstellungen einschalten.
Verbinden Sie den LAN-Anschluss des GoodWe-Wechselrichters mit demselben Netzwerk wie das ModbusCloud-Gateway, und vergeben Sie dem Wechselrichter über die DHCP-Reservierung Ihres Routers eine statische IP-Adresse, damit diese nach einem Neustart erhalten bleibt.
Fügen Sie im ModbusCloud-Portal das Gateway hinzu, importieren Sie die GoodWe-BatteryInverter-Vorlage, setzen Sie die Unit-ID auf 247 (Werkseinstellung) und tragen Sie die statische IP-Adresse sowie Port 502 ein.
Lesen Sie das Register grid_volt_high_s1_a (Adresse 45400) in der Live-Datenanzeige des Portals zurück, um die Verbindung zu bestätigen; ein von null abweichender Wert zeigt eine funktionierende Kommunikation an.
Zu beachten
Warum liefern alle Register null oder keine Antwort?
Der GoodWe BatteryInverter antwortet auf Modbus-TCP-Anfragen nur, wenn er durch DC (PV) oder AC (Netz) versorgt wird. Im Standby ohne Spannungsversorgung sendet der Wechselrichter keine Antworten. Prüfen Sie außerdem, ob das LAN-Modul installiert ist: Der standardmäßige WiFi-only-Dongle unterstützt kein Modbus TCP.
Das Gateway verbindet sich, aber ich lese fehlerhafte Werte auf Schutzregistern.
GoodWe speichert skalierte Integer-Werte: Einige Größen verwenden den Faktor 0,1 (Spannung in Zehntel Volt, Frequenz in Hundertstel Hertz). Prüfen Sie Rohregisterwerte anhand des offiziellen Modbus-Protokolldokuments mit dem korrekten Skalierungsfaktor, bevor Sie Alarme konfigurieren oder Werte vergleichen.
Ein Schreibzugriff auf ein Schutzschwellenregister zeigt keine Wirkung.
Der GoodWe BatteryInverter erfordert Modbus-Funktionscode 16 (0x10) zum Schreiben mehrerer Register. Stellen Sie sicher, dass Ihre Schreibtransaktion FC16 verwendet, wie in den _b-Registern dieser Vorlage definiert. Manche Firmware-Versionen akzeptieren außerdem keine Schreibzugriffe, wenn sich der Wechselrichter im Fehlerstatus befindet.
Darf ich LVRT-, HVRT- oder Frequenzauslöseschwellen ferngesteuert schreiben?
Gehen Sie mit größter Sorgfalt vor. Falsche Werte in Durchfahr- oder Netzschutzregistern (LVRT, HVRT, FRT, Spannungs- und Frequenzauslöseschwellen) können dazu führen, dass der Wechselrichter unerwartet vom Netz trennt, eine Netzcodeprüfung nicht besteht oder die Installationszertifizierung erlischt. Prüfen Sie Änderungen stets gegen lokale Netzanforderungen und stellen Sie im Zweifelsfall die Originalwerte wieder her.
Selbst sehen, wie es funktioniert?
