Monitor fridges and freezers in all your branches remotely
See the temperature of every fridge and freezer, per branch, and use the history for your HACCP records.
Temperature history from every branch for your HACCP records
In each branch a gateway reads the refrigeration controllers over Modbus RTU (RS485).
All temperatures are recorded and stay available for 365 days. Export them as CSV or as a PDF report for the inspector.
- Danfoss AK-CC55RS485, address 1Freezer−21.6 °C
- Danfoss EKC 202D1RS485, address 2Fridge3.2 °C
What retail chains use it for
Temperature history for HACCP
The temperature of every fridge is in the portal, including nights and weekends. A PDF report per branch serves as evidence at an inspection.
Prevent stock loss
You get an email when a temperature crosses a threshold or the controller reports a fault code. The service team can step in before the stock has to be thrown away.
All branches in one overview
Head office sees the status of every branch on the map. A regional manager gets the alerts for their own branches.
Alerts to your refrigeration engineer
Add your refrigeration engineer as an extra recipient on the alert rules. The email shows the alert and the measured value before they set off.
If a freezer fails at night, you find out in the morning
Freezer in fault
The morning opening
The branch manager opens at seven and finds water under a chest freezer. The freezer has been off since midnight, and the stock has to be thrown away.
Afternoon roundRound skipped
The clipboard
Twice a day a member of staff walks past every fridge and writes down the temperature. On a busy Saturday the afternoon round gets skipped.
12 branchesStatus unknown
The regional manager
A regional manager has twelve branches. They hear how the refrigeration is doing from the branch managers, if they remember to call.
Refrigeration controllers and meters in the store
Where the table says ‘Template ready’, the scan recognises the controller. For the other controllers we build the template for free as soon as we have the register data. You can also set up the registers yourself.
One RS485 line per branch takes up to 32 controllers.
Browse the library| Manufacturer | Controller | Modbus | Status |
|---|---|---|---|
| Danfoss | AK-CC55, EKC 202D1 | RTU (RS485) | Template ready |
| Danfoss | AK-CC 210, AK-CC 550 | RTU (RS485) | Template on request |
| Carel | MPXpro, ir33+, µC2 SE | RTU (RS485) | Template on request |
| Dixell (Copeland) | XR, XM | RTU (RS485) | Template on request |
| Eliwell (Schneider) | IDNext, EWPlus | RTU (RS485) | Template on request |
| Pego | ECP 202 | RTU (RS485) | Template ready |
| Eastron | SDM630, SDM72D-M | RTU (RS485) | Template ready |
Connect a branch in three steps
Connect
Run a two-wire RS485 cable (A and B) from controller to controller and on to the gateway.
Scan
Enter the serial number in the portal and start a scan. The gateway recognises the controllers and meters from the library.
Monitor
See the temperature per fridge and freezer. Set up alerts, for example when a freezer rises above −18 °C.
Price per gateway, annual or lifetime
Gateway
€295 one-off
€275 from 10 units, €249 from 25, quote from 50
Portal
€149 per year
Including 4G data up to 30 MB per month
€495 one-off
4G data with a lifetime licence
Only when 4G is used
€1 per month
€95 for ten years
All prices excl. VAT. White label customer portal included. All prices
100-day money-back guaranteeIf the gateway fails to connect to a Modbus device from our template library, you get your money back.
Want to see how it works?
