Read energy meters and inverters remotely
See meter readings and generation from different brands in one overview, and export the readings for billing.
Read meter readings for billing
The ModbusCloud Gateway reads energy meters and inverters over Modbus RTU (RS485) or Modbus TCP.
See the reading and power of each meter, with 365 days of history. Export meter readings as CSV for billing.
- Eastron SDM630RS485, address 1Reading12,481.6 kWh
- SMA Sunny TripowerNetwork, Modbus TCPP8.62 kW
What installers use the meter data for
Readings per tenant
In a multi-tenant building or an owners' association, you read every sub-meter remotely. At the end of the month, you export the readings as CSV.
Production, consumption and feed-in side by side
A dashboard shows the generation of the inverters next to the consumption and feed-in of the main meter.
Spot inverter faults sooner
When the power drops below a threshold or the inverter reports a fault code, you get an email. You step in before the owner calls.
Meter readings for your customer
Your customer sees their own meter readings in a customer portal in your branding and saves reports as PDF.
Three situations from energy management
Start of the monthManual readings
The meter round
Your engineer walks past twelve sub-meters and writes down the readings for billing. One figure is wrong, and the tenant spots it on the invoice.
3 portalsThree logins
SMA, Fronius and SolarEdge
You manage inverters from different brands. SMA, Fronius and SolarEdge each have their own portal, so you log in three times.
Generation onlyConsumption unknown
Half the energy balance
The inverter portal shows production. The consumption of the building, the chargers and the heat pump sits in other systems, or nowhere.
Templates for inverters and energy meters
These meters and inverters have a template ready, so the scan recognises them.
If your meter is not listed, we build the template for free as soon as we have the register data. You can also set up the registers yourself.
Browse the library| Manufacturer | Template | Modbus | Status |
|---|---|---|---|
| Eastron | Eastron SDM630 Series | RTU (RS485) | Template ready |
| Janitza | Janitza UMG-96 Modbus TCP | TCP (network) | Template ready |
| Carlo Gavazzi | Carlo Gavazzi EM24 | TCP (network) | Template ready |
| Circutor | Circutor CEM-C6 | RTU (RS485) | Template ready |
| ABB | Energy meter ABB B23 | RTU (RS485) | Template ready |
| SMA | SMA Sunny Tripower | TCP (network) | Template ready |
| Fronius | Fronius GEN24 | TCP (network) | Template ready |
| Huawei | HUAWEI SUN2000 Inverter & LUNA2000 battery | TCP (network) | Template ready |
| SolarEdge | SolarEdge Inverter | TCP (network) | Template ready |
| GoodWe | GoodWe Grid-Meter | TCP (network) | Template ready |
Connect a meter in three steps
Connect
Run an RS485 cable with two wires, A and B, from the meter to the gateway. An inverter can also connect over the network.
Scan
Enter the serial number in the portal and start a scan. The gateway recognises the meters and inverters from the library.
Monitor
See readings, power and voltage per meter. Set up alerts, for example when an inverter's power drops below 200 W.
Price per gateway, annual or lifetime
Gateway
€295 one-off
€275 from 10 units, €249 from 25, quote from 50
Portal
€149 per year
Including 4G data up to 30 MB per month
€495 one-off
4G data with a lifetime licence
Only when 4G is used
€1 per month
€95 for ten years
All prices excl. VAT. White label customer portal included. All prices
100-day money-back guaranteeIf the gateway fails to connect to a Modbus device from our template library, you get your money back.
Want to see how it works?
