OpenEMS Modbus templates
All 3 available OpenEMS templates for ModbusCloud.
Monitor OpenEMS-based storage systems with battery, grid, and PV data over Modbus.
- Templates
- 3
- Connection
- Modbus TCP
- Registers
- 2 per template
- Compatible models
- Modbus-API
- Last updated
The scan recognises these devices
Connect them to RS485 or the network and start a scan in the portal.
Gateway
Portal
Incl. 4G data up to 30 MB per month
Excl. VAT. White label customer portal included. All prices
Order your first gateway100-day money-back guaranteeIf the gateway fails to connect to a Modbus device from our template library, you get your money back.
OpenEMS is the open-source energy management system used inside many commercial and residential battery storage products, and any OpenEMS-driven site exposes a standard Modbus-API. That API splits the installation into three logical components: the battery with state of charge and power flow, the grid connection with import and export power, and the PV input feeding the system — exactly the structure an installer expects on commissioning.
ModbusCloud templates follow the OpenEMS Modbus-API directly. You read battery state of charge, battery charge and discharge power, grid import and feed-in power, and PV generation through Modbus without walking through the OpenEMS specification. Live values stream into your portal, history supports energy reports and self-consumption analysis, and alert rules fire on SOC thresholds, feed-in limits, or reported faults, with an offline alarm you switch on for when the ModbusCloud Gateway goes silent.
All OpenEMS templates are free to browse. Import the battery, grid, or PV template into your ModbusCloud portal and read live data within minutes.
What you can read out
- Battery state of charge
- Battery charge and discharge power
- Grid import and feed-in power
- PV generation power
- System operating state and faults
Typical installations
- Commercial battery storage with OpenEMS controllers in the cabinet
- Residential home storage products built on the OpenEMS stack
- System integrators unifying OpenEMS sites under one monitoring portal
Want to see how it works?
