
DEIF Modbus templates
All 6 available DEIF templates for ModbusCloud.
Monitor DEIF AGC genset controllers over Modbus RTU in your portal.
- Templates
- 6
- Connection
- Modbus RTU
- Registers
- 1016 to 1494 per template
- Compatible models
- AGC 150 Generator (genset controller) · AGC-4 Mk II (genset controller)
- Last updated
DEIF templates
6 via Modbus RTU
DEIF AGC 150 Engine and Plant DataExtended engine data, plant states and PMS lite status of the DEIF AGC 150 genset controller.Modbus RTU1494 read, 0 write
DEIF AGC 150 GensetGenset controller that measures, protects and controls the generator and engine of a genset or gas-engine CHP.Modbus RTU1220 read, 278 write
DEIF AGC 150 PMS lite Power ValuesNominal power, active power, reactive power and load percentage of each genset in a DEIF AGC 150 PMS lite network.Modbus RTU1016 read, 0 write
DEIF AGC-4 Mk II Engine and Plant DataExtended engine data, plant states, active alarm list and PMS lite status of the DEIF AGC-4 Mk II controller.Modbus RTU1487 read, 0 write
DEIF AGC-4 Mk II GensetGenset and CHP controller that measures, protects and controls the generator and engine of a gas-engine CHP.Modbus RTU1146 read, 276 write
DEIF AGC-4 Mk II PMS lite Power ValuesNominal power, active power, reactive power and load percentage of each genset in a DEIF AGC-4 Mk II PMS lite network.Modbus RTU1016 read, 0 write
The scan recognises these devices
Connect them to RS485 or the network and start a scan in the portal.
Gateway
Portal
Incl. 4G data up to 30 MB per month
Excl. VAT. White label customer portal included. All prices
Order your first gateway100-day money-back guaranteeIf the gateway fails to connect to a Modbus device from our template library, you get your money back.

DEIF makes the AGC 150 and AGC-4 Mk II controllers that measure, protect and control generator sets and gas-engine CHP units. You find them at emergency power installations and small power plants.
The gateway reads them over Modbus RTU on RS485. The templates hold generator values, engine data, plant states and the alarm list. In the portal you see per site whether a genset is ready and what it delivers.
What you can read out
- Active power and generator values
- Engine data and running state
- Active alarms
- Plant states and PMS lite status
Typical installations
- Emergency power sets at critical sites
- Gas-engine CHP units in greenhouses and industry
Want to see how it works?







