
Senmatic Modbus templates
All 7 available Senmatic templates for ModbusCloud.
Monitor Senmatic AMI Penta fertigation and LED light controllers over Modbus TCP in your portal.
- Templates
- 7
- Connection
- Modbus TCP
- Registers
- 12 to 1329 per template
- Compatible models
- AMI Penta · LED Light Controller
- Last updated
Senmatic templates
7 via Modbus TCP
Senmatic AMI Penta Group and RecipeIrrigation group and recipe of the AMI Penta: water volumes, cycles, drain, start conditions and EC and pH demand.Modbus TCP657 read, 459 write
Senmatic AMI Penta Manual ValvesHand-started valve list of the AMI Penta: 100 positions with valve, group, recipe, time and volume.Modbus TCP826 read, 808 write
Senmatic AMI Penta SystemFertigation mixer for greenhouses: EC, pH, flow, pumps, alarms and mixer settings.Modbus TCP1329 read, 520 write
Senmatic AMI Penta ValvesValve table of the AMI Penta irrigation controller: state, time, volume and flow for 200 valves.Modbus TCP1002 read, 1001 write
Senmatic AMI Penta WeatherWeather data on the AMI Penta irrigation controller: outdoor temperature, humidity, sun, wind and rain.Modbus TCP12 read, 0 write
Senmatic LED Light Controller CompartmentGrow light controller for greenhouses: LED groups, light sums, light sensors and energy per compartment.Modbus TCP1018 read, 579 write
Senmatic LED Light Controller WeatherWeather and global data of the LED Light Controller: outdoor climate, sun position, boiler demand and clock.Modbus TCP24 read, 5 write
The scan recognises these devices
Connect them to RS485 or the network and start a scan in the portal.
Gateway
Portal
Incl. 4G data up to 30 MB per month
Excl. VAT. White label customer portal included. All prices
Order your first gateway100-day money-back guaranteeIf the gateway fails to connect to a Modbus device from our template library, you get your money back.

Senmatic makes controllers for greenhouses: the AMI Penta for irrigation and fertigation, and LED light controllers per compartment.
The gateway reads them over Modbus TCP on the local network. The templates hold EC, pH, valve states, volumes and light sums. In the portal you follow a greenhouse per compartment and get an alarm when a value crosses your limit.
What you can read out
- EC, pH and flow of the mixer
- Time, volume and state per valve
- LED groups and light sums
- Active alarms
Typical installations
- Greenhouses with irrigation valves per section
- Grow lighting per compartment
Want to see how it works?







